NSN 4720-01-349-7782 · NIIN 013497782 · FSC 4720
NO DASHES 4720013497782
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.670 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.562 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 12.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 95.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL,THE CURRENT APPROVED SOURCES,81343 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |