NSN 2590-01-344-8257 · NIIN 013448257 · FSC 2590
NO DASHES 2590013448257
In Stock
WINCH,DRUM,VEHICLE MOUNTING
Miscellaneous Vehicular Components
Application: 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXH | PRIME MOVER QUANTITY | 1 |
| ABMZ | DIAMETER | FIRST DRUM INCHES NOMINAL 10.625 |
| ABMZ | DIAMETER | FLANGE ON FIRST DRUM INCHES NOMINAL 17.750 |
| ADQX | POWER DRIVE OPERATING PRESSURE | POUNDS PER SQUARE INCH GAGE 2400.0 |
| AGAV | END ITEM IDENTIFICATION | 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM) |
| AGRS | DISTANCE BETWEEN FLANGES | FIRST DRUM INCHES NOMINAL 7.000 |
| AKDJ | PRIME MOVER TYPE | HYDRAULIC MOTOR |
| APHE | OPERATION METHOD | POWERED |
| ATWP | TRAVEL RATE PER MINUTE | FEET 18.0 |
| ATWS | BRAKING METHOD | MANUAL |
| ATWU | LOAD MOVEMENT LIMIT AT SELECTED SPEED | FIRST DRUM POUNDS SINGLE SPEED 20000.0 |
| ATXB | RETRIEVAL WINDING METHOD | OVERWIND |
| ATXC | GEAR HOUSING LOCATION AND QUANTITY | LEFT OF DRUM 1 |
| ATXD | DRIVE END LOCATION | SAME SIDE |
| ATYH | DRUM SURFACE DESIGN | PLAIN |
| AWEX | WINCH LENGTH | INCHES NOMINAL 18.250 |
| AWEY | MOUNTING FRAME LENGTH | INCHES NOMINAL 29.625 |
| AWEZ | MOUNTING FRAME WIDTH | INCHES NOMINAL 11.250 |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BXWF | DRUM FLANGE DIAMETER | FIRST DRUM INCHES NOMINAL 17.750 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | WINCH,SELF RECOVERY |
| FEAT | SPECIAL FEATURES | SIDE MOUNT; SELF RECOVERY |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |