NSN 3020-00-738-1696 · NIIN 007381696 · FSC 3020
NO DASHES 3020007381696
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.2150 |
| STYL | STYLE DESIGNATOR | |
| CWPZ | HELIX ANGLE | DEGREES 54.6667 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 AND THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.234 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.094 |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.032 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWPC | THREAD FORM QUANTITY | 2 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| ALPN | FACE TYPE | STRAIGHT |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.187 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.141 |