NSN 3020-00-021-3185 · NIIN 000213185 · FSC 3020
NO DASHES 3020000213185
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.7070 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.410 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.230 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| FEAT | SPECIAL FEATURES | TEETH ON SIDE OF BEAR BODY FACING FIRST END |
| MATT | MATERIAL | BORE SURFACE ALUMINUM ALLOY 6061 |
| MATT | MATERIAL | HUB STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BORE SURFACE FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,ALLOY 6061,T6 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.6657 AND INCHES MAXIMUM 1.6667 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.190 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | SECOND END INCHES 0.1876 |
| CWRX | BORE NOMINAL DEPTH | SECOND END INCHES 0.630 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.310 |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 416 |
| SFTT | SURFACE TREATMENT | BORE SURFACE ANODIZE |