NSN 3040-00-104-4838 · NIIN 001044838 · FSC 3040
NO DASHES 3040001044838
In Stock
CLAMP,HUB
Miscellaneous Power Transmission Equipment
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | INSIDE PERIPHERY MICROINCHES 125 |
| CSYM | SURFACE FINISH | BOTH BEARING FLATS MICROINCHES 250 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI W1 |
| SFTT | SURFACE TREATMENT | OXIDE |
| STYL | STYLE DESIGNATOR | |
| ABNM | THICKNESS | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.188 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1875 |
| ADCQ | PLAIN HOLE DIAMETER | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1380 |
| AEUY | DISTANCE FROM BORE CENTERLINE TO END | INCHES MINIMUM 0.261 AND INCHES MAXIMUM 0.269 |
| AHYJ | CLAMP SECURING HOLE STYLE | |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.610 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.250 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| FEAT | SPECIAL FEATURES | ONE 0.041 IN. MIN,0.046 IN. MAX DIA HOLE DRILLED THRU LENGTH OF BALANCE |
| MATT | MATERIAL | STEEL |