NSN 5905-00-019-4594 · NIIN 000194594 · FSC 5905
NO DASHES 5905000194594
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 160.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.960 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 14.0 AND KILOHMS 2ND SECTION 2.0 AND KILOHMS 3RD SECTION 14.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 180.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.50 TO 0.50 AND 2ND SECTION -1.00 TO 1.00 AND 3RD SECTION -1.20 TO 1.20 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -20.0 TO 20.0 AND 2ND SECTION -10.0 TO 10.0 AND 3RD SECTION -20.0 TO 20.0 |
| AAPN | SECTION QUANTITY | 3 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.1000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.100 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0500 AND INCHES MAXIMUM 0.0900 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.973 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -400.0 TO 400.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 6.0 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0000 |