NSN 6105-01-371-3045 · NIIN 013713045 · FSC 6105
NO DASHES 6105013713045
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 10.750 |
| AAJU | OVERALL LENGTH | INCHES 17.120 |
| AAJV | OVERALL WIDTH | INCHES 14.750 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.314 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.174 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 1.3745 AND INCHES MAXIMUM 1.3750 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.380 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BTBY | SHAFT END STYLE | |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CNMM | FRAME SIZE DESIGNATION | 215T |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 7.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.620 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.250 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 7.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 9.400 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |