NSN 5905-00-231-3859 · NIIN 002313859 · FSC 5905
NO DASHES 5905002313859
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.031 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 21 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.90 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -150.0 TO 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -5.0 TO 5.0 AND 3RD SECTION -5.0 TO 5.0 AND 4TH SECTION -1.0 TO 1.0 AND 5TH SECTION -5.0 TO 5.0 AND 6TH SECTION -5.0 TO 5.0 AND 7TH SECTION -5.0 TO 5.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 4.500 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 2.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.875 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| AAPN | SECTION QUANTITY | 7 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.60 |
| AEFY | SHAFT END PLAY | INCHES 0.0025 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 358.0 |