NSN 5305-00-360-8095 · NIIN 003608095 · FSC 5305
NO DASHES 5305003608095
In Stock
SETSCREW
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.181 AND INCHES MAXIMUM 0.195 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.625 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.139 AND INCHES MAXIMUM 0.143 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.242 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.785 AND INCHES MAXIMUM 0.809 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.3470 TO 0.3570 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.559 AND INCHES MAXIMUM 0.585 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQJ | POINT STYLE | |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 3140 |
Supersedes
This item replaces cancelled NIINs 002157278 · 005123138. An older drawing citing one of those numbers resolves here.