NSN 3020-00-826-5234 · NIIN 008265234 · FSC 3020
NO DASHES 3020008265234
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.582 |
| CWNH | TOOTH FORM | STANDARD |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 150 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.5625 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |