NSN 3020-00-174-5553 · NIIN 001745553 · FSC 3020
NO DASHES 3020001745553
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0566 |
| AJLA | TEETH QUANTITY | 5 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 52.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.1944 |
| CWNH | TOOTH FORM | STANDARD |
| CWNK | FLANGE NOMINAL DIAMETER | INCHES 3.000 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPS | FLANGE NOMINAL THICKNESS | INCHES 0.313 |
| CWPZ | HELIX ANGLE | DEGREES 80.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.563 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.313 |
| CWSH | NOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE | INCHES 1.313 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.156 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.747 |
| CWTX | HUB NOMINAL DIAMETER | BETWEEN BODY AND FLANGE INCHES 1.813 |
| FEAT | SPECIAL FEATURES | 1ST END COUNTERBORED,1.969 IN. DIA BY 0.125 IN. DP; 0.062 IN. RADIUS ON BOTTOM OF COUNTERBORE |
| MATT | MATERIAL | OVERALL STEEL COMP 1335 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1335 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 005691317. An older drawing citing one of those numbers resolves here.