NSN 5910-00-065-9822 · NIIN 000659822 · FSC 5910
NO DASHES 5910000659822
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBD | TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -15.0 TO 15.0 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.067 AND INCHES MAXIMUM 0.075 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| AXCM | TUNING CHARACTERISTIC | SINGLE SECTION STRAIGHT LINE CAPACITY |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | MEGOHMS 100000.0 |
| AXHA | PLATE AIR GAP | INCHES 0.010 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.421 AND INCHES MAXIMUM 0.445 |
| AEBC | TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 45.0 |
| MATT | MATERIAL | CAPACITIVE ELECTRODE BRASS |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER -ETAL SURFACES |
| PRMT | PRECIOUS MATERIAL | SILVER |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION AC PEAK 650.0 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SLOTTED SCREW 1 |
| CTGS | CAPACITANCE DRIFT IN PICOFARADS | 0.04 |
| MATT | MATERIAL | BASE STEATITE |
| AAQL | BODY STYLE | |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 2000.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AFWY | TERMINAL THICKNESS | INCHES NOMINAL 0.016 |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| ATPA | PLATE QUANTITY | 4 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.465 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 1.2 TO 4.2 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.452 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.291 AND INCHES MAXIMUM 0.299 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.384 |