NSN 5305-00-271-7778 · NIIN 002717778 · FSC 5305
NO DASHES 5305002717778
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASXK | HOLE QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.113 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.594 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
Supersedes
This item replaces cancelled NIINs 001457043 · 005684353. An older drawing citing one of those numbers resolves here.