NSN 5990-00-928-5593 · NIIN 009285593 · FSC 5990
NO DASHES 5990009285593
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.100 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.2500 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.5615 AND INCHES MAXIMUM 1.5620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9370 AND INCHES MAXIMUM 0.9375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.0600 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.7450 AND INCHES MAXIMUM 1.7500 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 29 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| CQTM | TERMINAL LOCATION | REAR |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 2.5200 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 12000.00 AND MAXIMUM 14800.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 82.00 AND MAXIMUM 84.50 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 980.00 AND MAXIMUM 1180.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 42.00 AND MAXIMUM 52.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 7.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.6250 |
| AJSL | BODY SIZE | 18 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 50.0 |
Supersedes
This item replaces cancelled NIINs 006440114 · 007863205. An older drawing citing one of those numbers resolves here.