NSN 5306-00-335-4376 · NIIN 003354376 · FSC 5306
NO DASHES 5306003354376
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.181 AND INCHES MAXIMUM 0.186 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.320 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.188 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES NOMINAL 0.094 |
| MATT | MATERIAL | OVERALL STEEL COMP 1008 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.038 AND INCHES MAXIMUM 0.048 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.185 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.500 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL ZINC AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE 44E,FSC- 19207 AND MIL SPEC 2ND TREATMENT RESPONSE 10C,FSC- 19207 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| FEAT | SPECIAL FEATURES | 0.180 IN. MIN. 0.185 IN. MAX DIA BY 0.020 IN. MIN,0.040 IN. MAX LG POINT AT THD END |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.382 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
Supersedes
This item replaces cancelled NIINs 002079572 · 006378696. An older drawing citing one of those numbers resolves here.