NSN 4720-00-289-2975 · NIIN 002892975 · FSC 4720
NO DASHES 4720002892975
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -45.0 AND FAHRENHEIT 160.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.594 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 26.000 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING ALUMINUM ALLOY |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 150.0 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 300.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING ANODIZE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
Supersedes
This item replaces cancelled NIINs 003485975 · 007253093. An older drawing citing one of those numbers resolves here.