NSN 5905-00-232-1824 · NIIN 002321824 · FSC 5905
NO DASHES 5905002321824
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.031 |
| AAPN | SECTION QUANTITY | 3 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.625 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 2.656 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.10 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.9688 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | FIRST SECTION 1ST SECTION -200.0 TO 200.0 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SECOND SECTION 2ND SECTION -400.0 TO 400.0 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | THIRD SECTION 3RD SECTION -400.0 TO 400.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 85.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97151-8532039 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.0025 TO 0.0025 AND 2ND SECTION -0.002 TO 0.002 AND 3RD SECTION -0.001 TO 0.001 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FIRST SECTION FREE AIR 1ST SECTION 2.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.761 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1247 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 11 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.10 |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | THIRD SECTION FREE AIR 3RD SECTION 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 30.000 AND KILOHMS 2ND SECTION 10.000 AND KILOHMS 3RD SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.7500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | SECOND SECTION FREE AIR 2ND SECTION 1.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -5.0 TO 5.0 AND 2ND SECTION -10.0 TO 10.0 AND 3RD SECTION -10.0 TO 10.0 |