NSN 6105-00-635-6048 · NIIN 006356048 · FSC 6105
NO DASHES 6105006356048
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXCP | WINDING TYPE | INDUCTION-WOUND ROTOR |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1000 |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAJT | OVERALL HEIGHT | INCHES 2.938 |
| AAJU | OVERALL LENGTH | INCHES 5.625 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXGY | MOUNTING METHOD | FIXED BASE |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 8000.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.312 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 1.375 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.125 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| AAJV | OVERALL WIDTH | INCHES 3.750 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.2500 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
Supersedes
This item replaces cancelled NIIN 005235109. An older drawing citing one of those numbers resolves here.