NSN 3020-00-274-3324 · NIIN 002743324 · FSC 3020
NO DASHES 3020002743324
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 50 |
| CWTR | HUB STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | TIMING MARK ON CENTER OF TOOTH SPACE,FIRST SIDE OF GEAR FACE,7 DEG 1 MIN 15 SEC FROM CENTERLINE OF KEYWAY |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.154 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4800 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 15.0 AND ROCKWELL C MAXIMUM 23.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 15.0 AND ROCKWELL C MAXIMUM 23.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.675 |
| MATT | MATERIAL | OVERALL STEEL |
| CWPZ | HELIX ANGLE | DEGREES 39.5167 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.063 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.062 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.750 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.750 |
| AAQL | BODY STYLE |
Supersedes
This item replaces cancelled NIINs 003460055 · 003641152. An older drawing citing one of those numbers resolves here.