NSN 5905-00-676-5035 · NIIN 006765035 · FSC 5905
NO DASHES 5905006765035
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.75 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00200 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.8740 AND INCHES MAXIMUM 1.8750 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AAPN | SECTION QUANTITY | 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 4 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 175.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.531 AND INCHES MAXIMUM 0.594 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.938 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.375 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9950 AND INCHES MAXIMUM 2.0050 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.5 |