NSN 9540-01-163-2652 · NIIN 011632652 · FSC 9540
NO DASHES 9540011632652
In Stock
CHANNEL,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 3.350 |
| ABRY | LENGTH | FEET MINIMUM 10.000 AND FEET MAXIMUM 12.000 |
| ADXJ | LEFT SIDE FLANGE HEIGHT | INCHES NOMINAL 2.250 |
| ADXK | RIGHT SIDE FLANGE HEIGHT | INCHES NOMINAL 2.500 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.100 |
| ADXM | RIGHT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.200 |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 1.090 |
| AGTA | BASIC SHAPE STYLE | |
| AJGL | FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.125 |
| AJGM | OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.125 |
| AJGP | BASE FLANGE THICKNESS | INCHES NOMINAL 0.100 |
| AJGX | OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.125 |
| AJGY | FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.125 |
| BMPQ | RIGHT SIDE BOTTOM FLANGE THICKNESS | INCHES NOMINAL 0.100 |
| BMPR | LEFT SIDE BOTTOM FLANGE THICKNESS | INCHES NOMINAL 0.100 |
| BMPW | RIGHT SIDE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 1.795 |
| BMPX | LEFT SIDE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 1.555 |
| BRFD | WEIGHT PER UNIT MEASURE | POUNDS PER LINEAR FOOT 1.160 |
| CMZY | FIRST TIP STYLE | |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| CNQN | FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| CQHP | LEFT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CSQD | RIGHT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | 0.060 IN. TAPER ON RIGHT FLANGE,1.300 IN. DISTANCE FROM END OPPOSITE BOTTOM FLANGE INCLUDING 0.125 IN. RADIUS |
| HEAT | HEAT TREATMENT | T-76511 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE A-S-Q-A-200 TO 15 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TEMPER T76511 |