NSN 6105-01-163-2943 · NIIN 011632943 · FSC 6105
NO DASHES 6105011632943
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 16.180 |
| AAJU | OVERALL LENGTH | INCHES 26.750 |
| AAJV | OVERALL WIDTH | INCHES 14.000 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 1.5000 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1900 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.250 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.7500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | SEPARATELY VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 256TNY |
| CNXS | POWER RATING | INPUT HORSEPOWER 5.250 OR HORSEPOWER 17.500 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 1.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 7.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 12.500 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 1185.0 AND HIGH FULL LOAD 1770.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT LOW 8.500 OR HIGH 23.400 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 1.562 IN. DIA; SHAFT END THIRD STYLE 1.754 IN. MIN DIA,1.755 IN. MAX DIA; SHAFT STYLE A2 HAS 9/32 IN. DIA HOLE DRILL THRU |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 3 AND WIRE LEAD 3 |