NSN 3020-00-554-8540 · NIIN 005548540 · FSC 3020
NO DASHES 3020005548540
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL COMP 1022 OR STEEL COMP 8620 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.3440 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 3.6123 |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB SECOND END UNIFIED NATIONAL COARSE (UNC) |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.719 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.812 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.219 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.812 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.9650 |
| STYL | STYLE DESIGNATOR | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB SECOND END INCHES 0.250 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB SECOND END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.0900 |
| CWPC | THREAD FORM QUANTITY | 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-20166 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |