NSN 5306-01-048-0521 · NIIN 010480521 · FSC 5306
NO DASHES 5306010480521
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.877 AND INCHES MAXIMUM 0.927 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 6.012 AND INCHES MAXIMUM 6.042 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.327 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 5.115 AND INCHES MAXIMUM 5.135 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 8735 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |