NSN 5905-00-690-5676 · NIIN 006905676 · FSC 5905
NO DASHES 5905006905676
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.5615 AND INCHES MAXIMUM 1.5620 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.790 AND INCHES MAXIMUM 0.810 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.937 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.562 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0780 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.745 AND INCHES MAXIMUM 1.755 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.531 AND INCHES MAXIMUM 0.593 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.7450 AND INCHES MAXIMUM 1.7550 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONT FOR POLARIS |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 25.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.30 TO 0.30 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00200 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.40 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.321 AND INCHES MAXIMUM 1.403 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |