NSN 3010-01-087-5123 · NIIN 010875123 · FSC 3010
NO DASHES 3010010875123
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Application: NON-DIRECTIONAL BEACON (NDB)
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 1.375 |
| AAJU | OVERALL LENGTH | INCHES 3.688 |
| AAJV | OVERALL WIDTH | INCHES 1.375 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.2500 |
| ACDC | CURRENT TYPE | INPUT DC |
| AGAV | END ITEM IDENTIFICATION | NON-DIRECTIONAL BEACON (NDB) |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ANTN | SPECIFIC USE | ANTENNA TIMING UNIT |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 25.0 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 0.688 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.875 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.312 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.180 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 24.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 43.000 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FEAT | SPECIAL FEATURES | B1, TI 6740.3, FA 9782/1, 50 W ANTENNA TUNING UNIT, SEC 1-9, PG 8-1 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |