NSN 3120-01-204-3440 · NIIN 012043440 · FSC 3120
NO DASHES 3120012043440
In Stock
BEARING,PLAIN,SELF-ALIGNING
Bearings, Plain, Unmounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4370 AND INCHES MAXIMUM 0.4375 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.9370 AND INCHES MAXIMUM 0.9375 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.4370 AND INCHES MAXIMUM 0.4470 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5520 AND INCHES MAXIMUM 0.5620 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 10000 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 37.0 |
| CQFM | HARDNESS RATING | OUTER RACE MEMBER ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 36.0 |
| CTLM | LUBRICATION FEATURE | INNER MEMBER GROOVE AND PERFORATION |
| CTLM | LUBRICATION FEATURE | OUTER RACE MEMBER GROOVE AND PERFORATION |
| FEAT | SPECIAL FEATURES | RADIAL CLEARANCE 0.002 |
| MATT | MATERIAL | INNER MEMBER COPPER ALLOY |
| MATT | MATERIAL | OUTER RACE MEMBER STEEL COMP 630 |
| MATT | MATERIAL | LUBRICATION GREASE AND DISULFIDE MOLYBDENUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LUBRICATION MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-21164 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RACE MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 17576-2006920 |