NSN 5315-01-266-2805 · NIIN 012662805 · FSC 5315
NO DASHES 5315012662805
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 5.190 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 1.1170 AND INCHES MAXIMUM 1.1186 |
| ABPS | FIRST STEP LENGTH | INCHES NOMINAL 4.525 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.750 |
| ABPU | SECOND STEP LENGTH | INCHES NOMINAL 0.670 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.040 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 1.500 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 1.600 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 50.0 |
| CSYM | SURFACE FINISH | HEAD BEARING SURFACE MICROINCHES 63.0 |
| HGTH | HEIGHT | INCHES NOMINAL 0.190 |
| MATT | MATERIAL | OVERALL STEEL COMP 300M |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-8844,COND E1 OR E4 |
| STYL | STYLE DESIGNATOR |