NSN 5905-00-320-9881 · NIIN 003209881 · FSC 5905
NO DASHES 5905003209881
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDA | MOUNTING LIP DEPTH | INCHES MAXIMUM 0.0930 |
| AEDX | SHAFT STYLE | |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 2.1870 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.375 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3RD SECTION 7 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION 3RD SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03848-93861 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 15.0 AND KILOHMS 2ND SECTION 15.0 AND KILOHMS 3RD SECTION 10.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 3RD SECTION 60.0 AND 3RD SECTION 91.5 AND 3RD SECTION 132.0 AND 3RD SECTION 145.0 AND 3RD SECTION 172.0 AND 3RD SECTION 240.0 AND 3RD SECTION 307.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.30 TO 0.30 AND 2ND SECTION -0.20 TO 0.20 AND 3RD SECTION -0.50 TO 0.50 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.3730 AND INCHES MAXIMUM 1.3740 |
| AAVM | PILOT LENGTH | INCHES MAXIMUM 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.373 AND INCHES MAXIMUM 1.374 |
| ABPC | UNDERCUT WIDTH | INCHES MAXIMUM 0.0930 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.188 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 16 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |