NSN 2010-00-187-4800 · NIIN 001874800 · FSC 2010
NO DASHES 2010001874800
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEVE | KEYWAY QUANTITY | 4 |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 1.088 |
| ABQB | TAPER MAJOR DIAMETER | INCHES MINIMUM 23.040 AND INCHES MAXIMUM 23.060 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 23.100 AND INCHES MAXIMUM 23.120 |
| ABND | TAPER LENGTH | FEET NOMINAL 3.167 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 63.703 |
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 15.000 |
| ABET | THREAD LENGTH | INCHES 13.000 |
| CQCF | CONSTRUCTION | HOLLOW |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284, CLASS 2 |
| NMBR | QUANTITY | 2 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 1.750 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 8.375 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 24.995 AND INCHES MAXIMUM 25.000 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 9.729 |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 24.995 AND INCHES MAXIMUM 25.000 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AKYN | FURNISHED ITEMS AND QUANTITY | COMPACTING PLUG ASSEMBLY,1; COUPLING KEYS,4; LOCKING KEY,1; PROPELLER,1; SPLIT PINS,12 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | RESIN, EPOXY |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPJH | FORWARD END COUPLING DESIGN | DETACHABLE |
| CPJJ | FORWARD END COUPLING TYPE | SLEEVE |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 36.812 |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 23.000 |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 2.167 |
| CPTC | AFTER END DESIGN | TAPERED |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 203-4457003 | 80064 |
| 203-4457003L1 | 03950 |