NSN 2010-00-253-1009 · NIIN 002531009 · FSC 2010
NO DASHES 2010002531009
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 0.250 |
| AEJZ | DEPTH | INCHES NOMINAL 0.250 |
| AEVE | KEYWAY QUANTITY | 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER JAM NUT,1; PROPELLER KEY 1; PROPELLER COTER PIN,1; COUPLING KEY,1 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | MARINE PROPELLER,SHAFT ENDS AND HUBS AS MODIFIED BY OVERALL LENGTH |
| ABET | THREAD LENGTH | INCHES 2.438 |
| ABGL | WIDTH | INCHES NOMINAL 0.500 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 12.000 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| ABND | TAPER LENGTH | FEET NOMINAL 0.479 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 2.000 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-994A CO- A,COLD DRAWN AND EXTRUDED |
| NMBR | QUANTITY | 1 |
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 1.642 |
| CQRN | THREAD QUANTITY | PER INCH 6 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| MATT | MATERIAL | COPPER ALLOY 464 |
| BPJZ | USAGE LOCATION | CENTER |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| CPHX | FORWARD END DIAMETER | INCHES NOMINAL 2.000 |
| CPTC | AFTER END DESIGN | TAPERED |
| CQCF | CONSTRUCTION | SOLID |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 011118329. An older drawing citing one of those numbers resolves here.