NSN 2010-00-300-9855 · NIIN 003009855 · FSC 2010
NO DASHES 2010003009855
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633A, CO-OSITION B |
| AAZR | MAJOR DIAMETER | INCHES MINIMUM 3.743 AND INCHES MAXIMUM 3.745 |
| ABGL | WIDTH | INCHES MINIMUM 1.248 AND INCHES MAXIMUM 1.250 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 4.135 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 6.000 |
| ABND | TAPER LENGTH | FEET NOMINAL 1.000 |
| CQRN | THREAD QUANTITY | PER INCH 5.938 |
| CPNG | FORWARD END MAJOR DIAMETER | INCHES NOMINAL 1.000 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| AEVE | KEYWAY QUANTITY | 2 |
| ABRV | KEYWAY DEPTH | INCHES MINIMUM 0.503 AND INCHES MAXIMUM 0.505 |
| CPNH | FORWARD END THREAD QUANTITY | PER INCH 14 |
| CPNJ | FORWARD END THREAD LENGTH | INCHES 1.500 |
| CPTC | AFTER END DESIGN | TAPERED |
| CQCF | CONSTRUCTION | SOLID |
| FEAT | SPECIAL FEATURES | 2ND KEYWAY DEPTH 0.252 IN. MIN BY 0.255 IN. MAX; 2ND KEYWAY WIDTH 0.499 IN. MIN BY 0.500 IN. MAX |
| NMBR | QUANTITY | 1 |
| CPHX | FORWARD END DIAMETER | INCHES MINIMUM 4.502 AND INCHES MAXIMUM 4.503 |
| ABET | THREAD LENGTH | INCHES 5.938 |
| ABQB | TAPER MAJOR DIAMETER | INCHES MINIMUM 5.001 AND INCHES MAXIMUM 5.002 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.000 |
| MATT | MATERIAL | STEEL |
| AEJZ | DEPTH | INCHES MINIMUM 0.442 AND INCHES MAXIMUM 0.455 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 16508R | 42138 |