NSN 2010-00-726-1075 · NIIN 007261075 · FSC 2010
NO DASHES 2010007261075
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| APQB | UNIT TYPE | STERN TUBE SHAFT SECTION |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES NOMINAL 2.500 |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 2.510 |
| CPJJ | FORWARD END COUPLING TYPE | FLANGE |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.000 |
| BPJZ | USAGE LOCATION | PORT/STARBOARD |
| CPHM | FORWARD END DESIGN | TAPERED |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 24.000 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 3.500 AND INCHES MAXIMUM 3.562 |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 1.500 |
| CQCF | CONSTRUCTION | HOLLOW |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.125 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,CL AN,FORGED |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 2.500 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 25.875 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 7.062 |
| CPTS | COVERING LOCATION | ALL EXPOSED SURFACES COVERED |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 21.500 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 66.250 |
| CPNM | COUPLING LENGTH | FEET NOMINAL 0.792 |
| CPJH | FORWARD END COUPLING DESIGN | DETACHABLE |
| AEVE | KEYWAY QUANTITY | 3 AND 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 38.500 |
| AKYN | FURNISHED ITEMS AND QUANTITY | COUPLING,1 FURNISHED |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 1.833 |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 25.875 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 6.250 AND INCHES MAXIMUM 18.000 |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 4.750 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1669-38-3PC107 | 70983 |
| CGN9-203-1732112PC107 | 80064 |