NSN 2010-00-807-7986 · NIIN 008077986 · FSC 2010
NO DASHES 2010008077986
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| CPTS | COVERING LOCATION | SURFACE BETWEEN BEARING SLEEVE COVERED IN ACCORDANCE W/MIL-R-15058F,TYPE 3 |
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 2.500 |
| ABET | THREAD LENGTH | INCHES 4.000 |
| ABGL | WIDTH | INCHES NOMINAL 0.750 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 10.927 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 3.375 |
| ABND | TAPER LENGTH | FEET NOMINAL 0.812 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 3.375 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.750 |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 3.375 |
| CQCF | CONSTRUCTION | SOLID |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| BPJZ | USAGE LOCATION | CENTER |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 4.000 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 1.042 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 4.000 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 1.438 |
| CPNH | FORWARD END THREAD QUANTITY | PER INCH 4 |
| CPNJ | FORWARD END THREAD LENGTH | INCHES 2.750 |
| CPTC | AFTER END DESIGN | TAPERED |
| NMBR | QUANTITY | 1 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PROTECTIVE COVERING DATA AND SPECIAL FEATURES |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 0.375 |
| AEJZ | DEPTH | INCHES NOMINAL 0.313 |
| AEVE | KEYWAY QUANTITY | 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER KEY,1 |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE ABS, GRADE 2, FORGE |
| CPNG | FORWARD END MAJOR DIAMETER | INCHES NOMINAL 2.500 |
| FEAT | SPECIAL FEATURES | SHAFT SLEEVES TO CONFORM W/FED SPEC QQ-L-225 COMPOSITION 5,CENTRIFUGAL CAST |
| MATT | MATERIAL | STEEL |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 0.375 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S8203-30-45-1230869REVJ | 80064 |
| S8203X30X45X1230869REVJ | 80064 |
Supersedes
This item replaces cancelled NIIN 005298255. An older drawing citing one of those numbers resolves here.