NSN 2010-01-141-9944 · NIIN 011419944 · FSC 2010
NO DASHES 2010011419944
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES MINIMUM 9.000 AND INCHES MAXIMUM 9.001 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 34.850 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 18.000 |
| ABMZ | DIAMETER | INCHES NOMINAL 21.000 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 3.750 AND INCHES NOMINAL 3.812 |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 1.500 |
| AEVE | KEYWAY QUANTITY | 4 |
| AGYE | SURFACE FINISH | GROUND/POLISHED |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES MINIMUM 41.245 AND INCHES MAXIMUM 41.250 |
| APQB | UNIT TYPE | TAIL SHAFT SECTION |
| BPJZ | USAGE LOCATION | PORT/STARBOARD |
| CBME | CUBIC MEASURE | CUBIC INCHES 739584.000 |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES MINIMUM 14.372 AND INCHES MAXIMUM 14.374 |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES NOMINAL 3.625 |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 1.375 |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 7.250 |
| CPTC | AFTER END DESIGN | STRAIGHT |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 20.245 AND INCHES MAXIMUM 20.250 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 3.000 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 22.995 AND INCHES MAXIMUM 23.000 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 5.500 |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES MINIMUM 17.825 AND INCHES MAXIMUM 17.828 |
| CQCF | CONSTRUCTION | HOLLOW |
| CTJS | UNPACKAGED UNIT WEIGHT | POUNDS NOMINAL 31576.000 |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.125 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 378FRAM-W-243-30 | 06101 |