NSN 2010-00-573-8053 · NIIN 005738053 · FSC 2010
NO DASHES 2010005738053
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES MINIMUM 13.380 AND INCHES MAXIMUM 13.560 |
| CPTC | AFTER END DESIGN | STRAIGHT |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 20.621 AND INCHES MAXIMUM 20.625 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 2.250 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 20.621 AND INCHES MAXIMUM 20.625 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 1.000 |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| CQCF | CONSTRUCTION | HOLLOW |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284, CLASS 3 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 30.088 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| ABMZ | DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| AGYE | SURFACE FINISH | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| APQB | UNIT TYPE | LINE SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| BPJZ | USAGE LOCATION | PORT |
| CPNM | COUPLING LENGTH | FEET NOMINAL 0.354 |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 4.250 |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 0.442 |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES NOMINAL 4.250 |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| CPHX | FORWARD END DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPHM | FORWARD END DESIGN | STRAIGHT |