NSN 3405-00-528-8688 · NIIN 005288688 · FSC 3405
NO DASHES 3405005288688
In Stock
SAW,BAND,METAL CUTTING
Saws and Filing Machines
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARDQ | TABLE LENGTH | INCHES NOMINAL 33.500 |
| ARDR | TABLE WIDTH | INCHES NOMINAL 26.500 |
| ANCY | HORSEPOWER RATING | 3.000 |
| AQCL | THROAT DEPTH | INCHES NOMINAL 20.000 |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| ALDF | FRAME TYPE | RIGID |
| BWMZ | CUTTING SPEED RANGE | FEET PER MINUTE 5.0 TO 5200.0 |
| BWNB | CUTTING SPEED QUANTITY | 2 |
| BWNF | BRAKING DEVICE TYPE | NONAUTOMATIC |
| AAXX | MOUNTING TYPE | FLOOR |
| ABFF | FURNISHED ITEMS | BRAKING FACILITY AND BUILT-IN COOLANT SYSTEM AND INTEGRAL BUTT WELDER AND INTEGRAL GRINDER |
| FEAT | SPECIAL FEATURES | AVAILABLE VOLT RATING 200/208/230/460/575;BLADE ACCOM 1/16 TO 1 IN.;TWO CUTTING SPEED RANGES-LOW 5 TO 300 FPM HIGH 850 TO 5200 FPM;FEED METHOD CAN BE CUTTING BAND INTO WORK AND WORK INTO CUTTING BAND |
| AMSE | VOLTAGE RATING | VOLTS MINIMUM 200.0 AND VOLTS MAXIMUM 575.0 |
| AMWX | FEED METHOD | CUTTING BAND INTO WORK |
| ACDC | CURRENT TYPE | DC |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | SET OF SAW GUIDE BLOCKS W/CARBIDE BACKUP AND SAW GUIDE INSERTS,1;AIR COMPRESSOR,1;CHIP DRAWER,1;WORKLIGHT,1 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BNBB | TABLE TYPE | TILTING |
| BWLY | TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| BWLZ | TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BWMG | BLADE MAXIMUM LENGTH ACCOMMODATED | INCHES 154.000 |
| BWMH | BLADE MAXIMUM WIDTH ACCOMMODATED | INCHES 1.000 |
| BWML | VISE | NOT PROVIDED |
| BWMN | DISTANCE BETWEEN GUIDE AND TABLE | INCHES NOMINAL 12.000 |
| CBBL | FEATURES PROVIDED | POWER FEED |
| AMZE | ROTATIONAL SPEED RATING IN RPM | 5200.0 |