NSN 2920-00-244-5103 · NIIN 002445103 · FSC 2920
NO DASHES 2920002445103
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.656 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.875 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.250 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.375 |
| ADER | MOUNTING STYLE | |
| ADPY | PILOT HEIGHT | INCHES NOMINAL 0.344 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 1.000 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.344 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1100 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 900 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCGW | DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 3.219 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| BCMK | DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | INCHES NOMINAL 7.219 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3500 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.438 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 32.0 |