NSN 3010-00-846-4959 · NIIN 008464959 · FSC 3010
NO DASHES 3010008464959
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKPS | DUTY CYCLE | CONTINUOUS |
| AGRB | FLAT DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.020 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | IDENTICAL ENDS SINGLE REVOLUTIONS PER MINUTE 9.770 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | IDENTICAL ENDS DEGREES 90.0 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | IDENTICAL ENDS ANGLED TO ARMATURE/ROTOR AXIS |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| TTQY | TERMINAL TYPE AND QUANTITY | PLUG 1 |
| ANPZ | ENCLOSURE FEATURE | INDUSTRIAL |
| AAJT | OVERALL HEIGHT | INCHES 3.328 |
| AAJU | OVERALL LENGTH | INCHES 7.093 |
| AAJV | OVERALL WIDTH | INCHES 3.328 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.3120 |
| ABXQ | FLATTED PORTION LENGTH | IDENTICAL ENDS INCHES NOMINAL 0.810 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 0.062 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWDY | TEMP RATING | OPERATING CELSIUS -17.5 AND OPERATING CELSIUS 48.9 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0066 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.939 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.968 |
| FEAT | SPECIAL FEATURES | EXCEPT AS MODIFIED BY STYLE,GEARED HEAD OUTPUT SHAFT IS VERTICAL TO MTG BASE |