NSN 3130-00-182-8629 · NIIN 001828629 · FSC 3130
NO DASHES 3130001828629
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | INNER RACE STEEL COMP E52100 |
| MATT | MATERIAL | HOUSING STEEL COMP XM-12 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | BALL STEEL COMP E51100 OR STEEL COMP E52100 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RACE FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 97499-BS 4075 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.830 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| CWJW | MOUNTING HOLE TYPE | ROUND, THREADED |
| FEAT | SPECIAL FEATURES | 2ND MTG HOLE 15/16-24UNF 3B |
| MATT | MATERIAL | SEAL STEEL CORROSION RESISTING AND PLASTIC POLYTETRAFLUOROETHYLENE AND STEEL CORROSION RESISTING AND GLASS FIBER AND PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD ALL MATERIAL RESPONSES 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HOUSING ASSN STD SINGLE MATERIAL RESPONSE A-S 5659 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RACE FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD 1ST MATERIAL RESPONSE A-S 3652 OR ASSN STD 2ND MATERIAL RESPONSE A-S 3666 |
| SFTT | SURFACE TREATMENT | INNER RACE CADMIUM |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 1.055 AND INCHES MAXIMUM 1.057 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 2.075 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 2.335 |
| AGZA | ALIGNMENT TYPE | RIGID |