NSN 3110-00-157-6105 · NIIN 001576105 · FSC 3110
NO DASHES 3110001576105
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVZ | GROOVE DIAMETER | INCHES MINIMUM 1.6200 AND INCHES MAXIMUM 1.6230 |
| ABGF | GROOVE WIDTH | INCHES MINIMUM 0.5100 AND INCHES MAXIMUM 0.5150 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.8750 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.2500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.3750 AND INCHES MAXIMUM 1.3830 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 2.8125 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.0600 AND INCHES MAXIMUM 2.0650 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 25.0 |
| FEAT | SPECIAL FEATURES | BANDED OD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE DOD-G-24508 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |