NSN 5905-01-174-4447 · NIIN 011744447 · FSC 5905
NO DASHES 5905011744447
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Application: GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT,SIRIUS CLASS T-AFS 8,AUSTIN SHIP CLASS LPD-4 AMPHIBIOUS TRANSPORT DOCKS,OLIVER PERRY CLASS FFG,SPRUANCE CLASS DD(963),FORRESTAL CLASS CV,WHIDBEY ISLAND CLASS LSD,KILAUEA CLASS T-AE 26
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.859 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.250 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.750 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.375 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.484 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.500 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 265.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 4.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 4.50 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.250 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT,SIRIUS CLASS T-AFS 8,AUSTIN SHIP CLASS LPD-4 AMPHIBIOUS TRANSPORT DOCKS,OLIVER PERRY CLASS FFG,SPRUANCE CLASS DD(963),FORRESTAL CLASS CV,WHIDBEY ISLAND CLASS LSD,KILAUEA CLASS T-AE 26 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 295.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQPH | DEVICE DESIGN TYPE | AT 3:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |