NSN 3020-00-272-6040 · NIIN 002726040 · FSC 3020
NO DASHES 3020002726040
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 30.0 |
| FEAT | SPECIAL FEATURES | 2 0.125 IN. DIA PLAIN HOLES ON FIRST END HUB FOR POSITIONING |
| MATT | MATERIAL | OVERALL STEEL |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2500 |
| AJLA | TEETH QUANTITY | 9 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.8733 |
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.9985 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.6250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.4983 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.313 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.690 |
| CWNH | TOOTH FORM | STANDARD |