NSN 3020-00-517-3106 · NIIN 005173106 · FSC 3020
NO DASHES 3020005173106
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.561 |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| AJLA | TEETH QUANTITY | 16 |
| MATT | MATERIAL | OVERALL STEEL COMP 1010 AND STEEL COMP 1015 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.280 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.313 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.400 |
| FEAT | SPECIAL FEATURES | 1/32 IN. BY 0.005 IN. DEEP RELIEF BETWEEN HUB AND GEAR FACE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5000 |