NSN 5905-00-832-5237 · NIIN 008325237 · FSC 5905
NO DASHES 5905008325237
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -10.0 TO 10.0 AND 2ND SECTION -20.0 TO 20.0 AND 3RD SECTION 0.0 TO 20.0 AND 4TH SECTION -10.0 TO 10.0 AND 5TH SECTION 0.0 TO 20.0 AND 6TH SECTION -0.5 TO 0.5 AND 7TH SECTION 0.0 TO 20.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19200-10545461 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 27 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 7.00 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 2.875 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0550 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3RD SECTION 3 AND 4TH SECTION 1 AND 5TH SECTION 2 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 5.000 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 3.364 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 3.0050 |
| AEDA | MOUNTING LIP DEPTH | INCHES MAXIMUM 0.0980 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0600 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 3.125 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.250 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.0 AND OHMS 2ND SECTION 570.0 AND KILOHMS 3RD SECTION 5.0 AND KILOHMS 4TH SECTION 50.0 AND KILOHMS 5TH SECTION 5.0 AND KILOHMS 6TH SECTION 20.0 AND KILOHMS 7TH SECTION 7.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -400.0 TO 400.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 4.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.02 TO 0.02 |
| AAPN | SECTION QUANTITY | 7 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 5.780 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 2.8750 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |