NSN 5365-00-006-0375 · NIIN 000060375 · FSC 5365
NO DASHES 5365000060375
In Stock
SPACER,PLATE
Bushings, Rings, Shims, and Spacers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.167 AND INCHES MAXIMUM 0.175 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.625 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.625 |
| ADPQ | INSIDE CORNER RADIUS | INCHES MAXIMUM 0.030 |
| ADUE | APERTURE WIDTH | INCHES MINIMUM 0.397 AND INCHES MAXIMUM 0.403 |
| ADUF | APERTURE LENGTH | INCHES MINIMUM 0.897 AND INCHES MAXIMUM 0.903 |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | INCHES NOMINAL 0.125 |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | INCHES NOMINAL 0.125 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES MINIMUM 1.216 AND INCHES MAXIMUM 1.224 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES MINIMUM 1.276 AND INCHES MAXIMUM 1.284 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.203 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.173 |
| AECS | BOLT HOLE QUANTITY | 4 |
| MATT | MATERIAL | COPPER ALLOY 360 |
| SFTT | SURFACE TREATMENT | SILVER AND GOLD |