NSN 5905-00-897-5747 · NIIN 008975747 · FSC 5905
NO DASHES 5905008975747
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | INCHES MINIMUM 4.735 |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | INCHES NOMINAL 4.720 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.250 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 1.000 |
| AEDX | SHAFT STYLE | |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AAPN | SECTION QUANTITY | 2 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.187 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 6.250 |
| FEAT | SPECIAL FEATURES | GUN,5 IN./54 CAL.,MK-42+45; GUIDED MISSILE LAUNCHING SYSTEM,MK26; SURFACE MISSILE SYSTEM; GUN SYSTEM |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2123322 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 6 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.938 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.147 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -25.0 TO 25.0 |
| AAQL | BODY STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |