NSN 4710-01-718-7818 · NIIN 017187818 · FSC 4710
NO DASHES 4710017187818
In Stock
TUBING ASSEMBLY,NONMETALLIC
Pipe, Tube and Rigid Tubing
Application: 2320-01-552-2924 - DUMP TRUCK, M917A3
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ADJS | EXTERIOR COLOR | BLACK |
| AGAV | END ITEM IDENTIFICATION | 2320-01-552-2924 - DUMP TRUCK, M917A3 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT |
| THSD | THREAD SERIES DESIGNATOR | ALL ENDS ISO M |
| ADJL | INNER CONVEYING TUBE STYLE | |
| MATT | MATERIAL | TUBE PLASTIC POLYAMIDE NYLON |
| AWLS | CONNECTION TYPE | ALL ENDS UNTHREADED FLUID PASSAGE BOLT |
| CQJX | NOMINAL THREAD SIZE | ALL ENDS MILLIMETERS 14.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE KILOPASCALS (KPA) MAXIMUM 1250 |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.5 |
| CRDW | HYDROSTATIC TEST PRESSURE | KILOPASCALS 0.3 |
| AARX | INSIDE DIAMETER | MILLIMETERS NOMINAL 9.0 |
| ABJH | TEMP RATING | CELSIUS -40.0 AND CELSIUS 125.0 |
| ABKU | FLANGE THICKNESS | ALL ENDS MILLIMETERS NOMINAL 12.0 |
| ABKV | OUTSIDE DIAMETER | MILLIMETERS NOMINAL 16.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | MILLIMETERS 40.0 |
| AAGT | WALL THICKNESS | MILLIMETERS NOMINAL 7.0 |
| AAJF | THREAD DIRECTION | ALL ENDS RIGHT-HAND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FUEL PIPE EMS-PRE FILTER |
| FEAT | SPECIAL FEATURES | PART OF VEHICLE FUEL LINES. MATERIAL: PLASTIC PA 11-PHLY (PA 11 BESN P210 TL); BLACK OR TRANSPARENT. RUBBER COVER: PP/EPDM, BLACK; 80 DEG C PLUS/MINUS 5 DEG C; SHORE A. 93 GRAMS. CONSISTS OF: 4 X 5NS11/61724 20852764, SEALING RING, M14X14. (5331-01-688-0751) 1 X 5NS11 994093, TUBE, 12 X 1.5. 2 X 5NS11 977753, BANJO NIPPLE, 12X1.5 ALT.12. (4730-14-590-5089) 2 X 5NS11 991048, HOLLOW SCREW, M14X1.5 X 26 X 1. (4730-01-691-6605) WORKING TEMPERATURE RANGE - 40 DEG C TO + 125 DEG C. MAX. WORKING PRESSURE 1.25 MPA FOR BRAKE SYSTEM. TEST PRESSURE: 300 KPA MIN. |
| MATT | MATERIAL | SLEEVE RUBBER SYNTHETIC |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | ALL ENDS MILLIMETERS NOMINAL 14.0 |
| AKUU | END CONNECTION DESIGN | ALL ENDS STRAIGHT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |