NSN 5990-00-644-0088 · NIIN 006440088 · FSC 5990
NO DASHES 5990006440088
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQRG | BODY MATERIAL | ALUMINUM |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 660.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, THREADED, UNDERCUT |
| CQTM | TERMINAL LOCATION | REAR |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 4.8740 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.7500 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MAXIMUM 5.5000 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MAXIMUM 0.5000 |
| AJWW | AFT OF SECOND FLANGE DIAMETER | INCHES NOMINAL 4.8750 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 6.6180 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 4.000 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.2500 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-2335 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.3500 AND INCHES MAXIMUM 0.3505 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 1.0320 |
| AEDC | SHAFT UNDERCUT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0600 |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 3.2500 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 50.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 30.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSL | BODY SIZE | 58 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 9.2100 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 5.7480 AND INCHES MAXIMUM 5.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 5.3750 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 1.0600 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.990 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.5 |
| CTBP | SHAFT TIP LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2200 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 400.00 |
| CWJD | SHAFT UNDERCUT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0600 |
| FEAT | SPECIAL FEATURES | SHAFT KEYED WITH NO. 00 WOODRUFF KEYWHITNEY NO. 207 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-2335 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJSP | STATOR INPUT CURRENT RATING | AMPERES MAXIMUM 3.5 |