NSN 3020-00-618-3274 · NIIN 006183274 · FSC 3020
NO DASHES 3020006183274
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.8570 |
| ABSA | SPLINE QUANTITY | 6 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.875 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.073 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.0810 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.808 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | TRANSVERSELY THROUGH FLANGE INCHES 2.921 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 AND STEEL COMP 8640 AND STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,FS 8640,FS 8740,FS 4140 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| CWTR | HUB STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 40 |
| STYL | STYLE DESIGNATOR | |
| CWQD | PITCH ANGLE | DEGREES 63.4333 |